Skip to content
PRODUCT 02 — DS ROBOTICS ECOSYSTEM

AeroNest

Autonomous Drone Station

AeroNest is a station that shelters, raises and recovers a drone in the field. Its lids slide apart, the landing plate rises and the drone goes out on its mission tethered or free. It adapts to any site, from farmland to a naval platform.

AgricultureDefense / Maritime
Drag the divider
THE AERONEST APPROACH

From launch to close-up, in one enclosure.

AeroNest brings the drone's shelter, landing platform, cable winch and power electronics into one housing. The station opens its lids, raises the plate, flies the drone tethered or free, centres it on landing and closes again.

Two variants
N1

The tethered variant delivers continuous power and data; the wireless variant receives the drone back from its mission.

VARIANTWIRELESS / TETHERED
Autonomous operation
N2

Opening, launch, landing and closing run in sequence without operator intervention.

PROCESSLAUNCH TO CLOSE
Fits any site
N3

The same enclosure and the same sequence on farmland, at a land base or on a naval platform.

SITELAND AND SEA
Protected enclosure
N4

Sealed lids shield the waiting drone from rain, dust, salt and sun.

BODYWATERPROOF *
Precision landing
N5

A marked landing point and a four-arm gripper align the drone to the centre of the plate every time.

CENTRINGFOUR-ARM
Flexible power
N6

Runs on grid, generator, solar or battery; a buffer battery ensures seamless switch-over.

SOURCE4 OPTIONS
TECHNICAL SPECIFICATIONS
COMPONENTFEATUREIN USE
Launch platformLanding plate on a scissor liftFour-arm centring gripper
Flight modeTethered and freeTwo modes in one station
Tethered modeHybrid tether from the plate centreActive tension control by winch; compatible with AirLink
Free modeAutomatic landing on returnShelter and standby in the station
Precision landingCoded IR LED markersOptional RTK-GNSS
EnergyGrid, generator, solar or batteryBuffer battery for seamless switch-over
Environmental sensingIntegrated weather stationLaunch decisions based on wind and rain
OPERATING SEQUENCE

One mission, four steps.

  1. STEP 1
    Lids open, the weather mast rises
    PREPARE
  2. STEP 2
    The plate rises, the grippers release the drone
    LAUNCH
  3. STEP 3
    Mission flight: tethered, the winch manages tension; free, the station awaits the return
    MISSION
  4. STEP 4
    The drone lands and is centred, the lids close
    CLOSE
COLLABORATION

Request a briefing on the AeroNest programme.

Write to us about pilot deployment, site integration and R&D partnership.

GET IN TOUCH
*ideal**Images show the prototype design; the final product may differ in appearance.